色丁狠狠桃花久久综合网_人与禽交videos欧美_成人无码aⅴ片在线观看_久久久久亚洲AV片无码_精品一区二区三区在线观看视频_欧美又长又大又深又爽A片特黄_国产精品日韩AV在线播放_久草玖玖玖爱在线资源

How to extend the life of the projector lamp life time.

We all know that the projector bulb is easy to consumes, the replacement cost is relatively high, although the first UHP bulb and UHE bulb life are relatively long, but in daily use, if improper use of the projector will bulb Produce fatal injuries. So the proper use of the day is very important. Which is why many customers will mention the loss of the projector bulb is caused by what the following we have collected some of the relevant operations and the use of the process of attention, as long as we strictly in accordance with the operation of the projector to perform, so long Time to stick to it, while maintaining the machine that is to help the lamp to extend the use of time life.


   1, first of all to pay attention to the switch machine sequence, the incorrect switch sequence will not only lead to the life of the projector, will also cause damage to the bulb. If not in the correct order, the projector light bulb is likely to not get good heat, serious will lead to unimaginable danger.


   2, do not switch frequently, in the boot and shutdown state between the switch, the user should keep the time between 5 minutes for cooling, which is due to the projector power supply part of the transformer and power switch and other electronic components, These components in the frequent switching of the working state of the process will produce a lot of heat, resulting in the projector internal operating temperature is too high, so that caused the bulb explosion. And do not use things to cover the lens so that the light will be cast light in the lens, long time is too long, will inevitably cause high damage to the lens and light machine.


   3, the projector in the use of the process, do not move the projector (which is the desktop delivery of the user), because in the projection process, the bulb inside the filament is usually in the semi-molten state to work, if at this time frequent movement Projection, is likely to damage the projection lamp.


  4, the projector as far as possible not to last more than four hours.The projector every time the work should not be more than four hours or more, otherwise the projector in the course of a long time will work, emitting a great heat, the lamp will produce a very High temperature, easy to cause the rapid attenuation of light bulb brightness. This is based on your high-definition projector to set the heat like a cold light source to produce smaller heat. It is not good to watch the eye for a long time.


 5, the heat is the deadly killer lamp projection, especially as now slowly into the summer indoor and outdoor temperature is relatively large, after the projector shut down, it is best to let the natural cooling for some time. Because the projector's closed design is difficult to automatically heat, unplug the power, the projection fan will immediately stop working, so as to project a long time after the lamp work a lot of heat, it will accumulate in the projector, seriously affecting the bulb and The electrical performance of the internal components, serious cases can cause the bulb to explode.


 6, the projector is also very important place to place, pay attention to moisture, the North generally do not have this problem, such as the projector for high-precision electronic products, the indoor air humidity is a certain requirement. The projector is very susceptible to wet air erosion in the projection environment. To develop good habits to make the life of the lamp with a long, but also make your projector more healthy.